Latest revision as of 22:01, 18 May 2009

Introduction

This page provides a breakdown of the common Camino build errors, their causes, and instructions for resolving the errors.

Before looking for your error on this page, make sure that the Camino tinderbox was green when you pulled your source tree.

If the Camino tinderbox or the Mac builds or UNIX/Linux builds in the SeaMonkey or Firefox tinderboxes are orange or red, you should avoid checking out.

If the tinderbox was green when you checked out your source tree, look for your error below.

If you don't see your build error below, be sure to also check Mac OS X Build Prerequisites: Troubleshooting in the Mozilla Developer Center for late-breaking build errors.

Build Errors extracted from the cbo Build FAQ

Q. I get a link error when building Camino.
A. This has most likely occurred because you are building from within Xcode and have set up .mozconfig for an optimized build and Xcode for a debug build, or the other way around. Follow the instructions above to set your build mode in both .mozconfig and Xcode. Or just build from the command line using make -f client.mk.

Q. I get errors that the Camino build failed at some <CopyFilesX> where X is some number.
A. Usually this is because you forgot to make in embedding/config after making code changes. Follow the instructions carefully, and try again.

pbxcp: libpermissions.dylib: No such file or directory

In XCode 2.3:

Error message

Build target "Camino" of project "Camino" with configuration "Development" - (1 error)
Copying ../dist/bin/components/libpermissions.dylib - (1 error)
pbxcp: libpermissions.dylib: No such file or directory
Build failed (1 error)

Cause

You have enabled a static build of Camino in your .mozconfig, but not in Xcode (target mismatch).

Solution

Remove the following lines from your .mozconfig (rather than change Xcode's target, since static builds aren't useful for development)

ac_add_options --disable-shared
ac_add_options --enable-static

and make again (?)

mozilla-config.h: No such file or directory

In Xcode

Error Message

ChimeraPrefix.h:2: mozilla-config.h: No such file or directory
PreferencePaneBase.mm:168: error: `ClearUserPref' undeclared (first use this function)
PreferencePaneBase.mm:161: error: `prefValue' undeclared (first use this function)
PreferencePaneBase.mm:161: error: `SetIntPref' undeclared (first use this function)
PreferencePaneBase.mm:160: error: `PRInt32' undeclared (first use this function)
PreferencePaneBase.mm:160: error: parse error before `=' token
PreferencePaneBase.mm:153: error: `PR_TRUE' undeclared (first use this function)
PreferencePaneBase.mm:153: error: `PR_FALSE' undeclared (first use this function)
PreferencePaneBase.mm:153: error: `SetBoolPref' undeclared (first use this function)
PreferencePaneBase.mm:133: error: `SetCharPref' undeclared (first use this function)
PreferencePaneBase.mm:126: error: `intPref' undeclared (first use this function)
PreferencePaneBase.mm:122: error: `PRInt32' undeclared (first use this function)
PreferencePaneBase.mm:122: error: parse error before `=' token
PreferencePaneBase.mm:117: error: `boolPref' undeclared (first use this function)
PreferencePaneBase.mm:112: error: `PRBool' undeclared (first use this function)
PreferencePaneBase.mm:112: error: parse error before `=' token
PreferencePaneBase.mm:73: error: `rv' undeclared (first use this function)
PreferencePaneBase.mm:73: error: `NS_SUCCEEDED' undeclared (first use this function)
PreferencePaneBase.mm:72: error: `nsresult' undeclared (first use this function)
PreferencePaneBase.mm:72: error: parse error before `=' token
PreferencePaneBase.mm:71: error: `nsnull' undeclared (first use this function)
PreferencePaneBase.mm:60: error: `NS_IF_ADDREF' undeclared (first use this function)
PreferencePaneBase.mm:58: error: `prefService' undeclared (first use this function)
PreferencePaneBase.mm:58: error: `NS_ASSERTION' undeclared (first use this function)
PreferencePaneBase.mm:57: error: `nsCOMPtr' undeclared (first use this function)
PreferencePaneBase.mm:57: error: parse error before `>' token
PreferencePaneBase.mm:49: error: `NS_IF_RELEASE' undeclared (first use this function)  (Each undeclared identifier is reported only once for each function it appears in.)
PreferencePaneBase.mm:43: nsIPref.h: No such file or directory
PreferencePaneBase.mm:42: nsIServiceManager.h: No such file or directory
PreferencePaneBase.mm:41: nsCOMPtr.h: No such file or directory

Cause

You attempted to build in Xcode before completing a command-line (make) build.

Solution

Re-read the instructions on building Gecko and Camino and perform the required steps (specifically step 5).

"/Users/username/Documents/code/CaminoUni/ppc/dist/CaminoDebug.app" failed: No such file or directory (2)

In Terminal

Error Message

** BUILD SUCCEEDED **
rsync -a --copy-unsafe-links build/Development/Camino.app/ ../dist/Camino.app
rm -f ../dist/Camino.app/Contents/MacOS/components/camino.xpt
../dist/bin/xpt_link ../dist/Camino.app/Contents/MacOS/camino.xpt ../dist/Camino.app/Contents/MacOS/components/*.xpt
rm -f ../dist/Camino.app/Contents/MacOS/components/*.xpt
mv ../dist/Camino.app/Contents/MacOS/camino.xpt ../dist/Camino.app/Contents/MacOS/components/camino.xpt
tier_testharness:  
/usr/bin/make export_tier_testharness
export_tier_testharness
/usr/bin/make libs_tier_testharness
libs_tier_testharness
set -e; \
for mkfile in build/macosx/universal/flight.mk; do \
  make -f /Users/username/Documents/code/mozilla/$mkfile postflight_all TOPSRCDIR=/Users/username/Documents/code/mozilla MOZ_OBJDIR=/Users/username/Documents/code/mozilla/../CaminoUni MOZ_BUILD_PROJECTS="ppc i386"; \
done
/usr/bin/make -C /Users/username/Documents/code/mozilla/../CaminoUni/ppc/camino/installer \
          UNIVERSAL_BINARY= SIGN_NSS= stage-package
Creating package directory...
building file list ... rsync: link_stat "/Users/username/Documents/code/CaminoUni/ppc/dist/CaminoDebug.app" failed: No such file or directory (2)
done

sent 25 bytes  received 20 bytes  90.00 bytes/sec
total size is 0  speedup is 0.00
rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-24/rsync/main.c(717)
make[2]: *** [stage-package] Error 23
make[1]: *** [postflight_all] Error 2
make: *** [build] Error 2

Cause

You attempted to build a Universal debug build (or have tried to make in camino/installer in a single-architecture debug build). In either case, the Camino.app in dist has built correctly and can be used for debugging.

Solution

Don’t attempt to package or distribute debug builds, and don’t attempt to build a Universal debug build. If you are doing development, you only need a single-architecture debug build. If you want to distribute builds, use a distribution .mozconfig instead.

internal compiler error: Bus error

In Terminal

Error Message

In file included from /builds/tinderbox/CmTrunk/Darwin_8.6.0_Depend/build/ppc/camino/src/extensions/CHStackView.m:41:
/builds/tinderbox/CmTrunk/Darwin_8.6.0_Depend/build/ppc/camino/src/extensions/NSView+Utils.h:45: internal compiler error: Bus error
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://developer.apple.com/bugreporter> for instructions.
{standard input}:10:FATAL:.abort  detected.  Assembly stopping.
** BUILD FAILED **
make[6]: *** [libs] Error 1
make[5]: *** [libs] Error 2
make[4]: *** [libs_tier_app] Error 2
make[3]: *** [tier_app] Error 2
make[2]: *** [alldep] Error 2
make[1]: *** [alldep] Error 2

Cause

You upgraded Xcode but did not delete the Xcode header cache.

Solution

Delete header cache from /Library/Caches/com.apple.Xcode.501/SharedPrecompiledHeaders as instructed in the build instructions.

Other stuff we've seen; details to be filled in

Things that need to be tested

[5:43pm] mento: case-sensitive hfs and ufs might not work for camino
[5:43pm] mento: we've had at least one patch to correct that, i'm not sure if there are more
[5:44pm] mento: problem was we were #including header files with the wrong case
[5:44pm] ardissone|away: yeah
[5:44pm] mento: nothing in the core, only in camino
[5:44pm] mento: someone liked calling it Quickdraw.h
[5:44pm] ardissone|away: i think we've fixed all the ones mentioned
[5:44pm] ardissone|away: we just need someone to try again
[5:44pm] mento: gofer it
[5:45pm] mento: actually, just set up a test disk image
[5:45pm] mento: copy the sdk to it
[5:45pm] mento: and the source tree
[5:45pm] mento: and build
[5:45pm] mento: no need for a whole system reinstall

Other

There are some described on the Camino Build instructions page, on Building Mozilla, and on the Mac Build Instructions pages (links below); most are probably not relevant at all.

Mac OS X Build Prerequisites: Troubleshooting
Mozilla Build FAQ: Mac-specific questions (less interesting, and more tuned to Fx)
[5:40pm] mento: the mac-specific questions on there - most of the errors there are no longer relevant, realy

Difference between revisions of "Development:Building:Build Errors"

Latest revision as of 22:01, 18 May 2009

Contents

Introduction

Build Errors extracted from the cbo Build FAQ

pbxcp: libpermissions.dylib: No such file or directory

Error message

Cause

Solution

mozilla-config.h: No such file or directory

Error Message

Cause

Solution

"/Users/username/Documents/code/CaminoUni/ppc/dist/CaminoDebug.app" failed: No such file or directory (2)

Error Message

Cause

Solution

internal compiler error: Bus error

Error Message

Cause

Solution

Other stuff we've seen; details to be filled in

Things that need to be tested

Other

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 8: / Line 8: @@
 If the tinderbox was green when you checked out your source tree, look for your error below.
+If you don't see your build error below, be sure to also check [http://developer.mozilla.org/en/docs/Mac_OS_X_Build_Prerequisites#Troubleshooting Mac OS X Build Prerequisites: Troubleshooting] in the Mozilla Developer Center for late-breaking build errors.
 == Build Errors extracted from the cbo Build FAQ ==
@@ Line 42: / Line 44: @@
 and <tt>make</tt> again (?)
-== make[7]: *** No rule to make target `nsIProxiedChannel.idl', needed by `_xpidlgen/nsIProxiedChannel.h'.  Stop. ==
+==mozilla-config.h: No such file or directory==
+In Xcode
-In Terminal
+====Error Message====
+<pre>ChimeraPrefix.h:2: mozilla-config.h: No such file or directory
-==== Error message ====
+PreferencePaneBase.mm:168: error: `ClearUserPref' undeclared (first use this function)
+PreferencePaneBase.mm:161: error: `prefValue' undeclared (first use this function)
- ../../../dist/bin/xpidl -m header -w -I. -I../../../dist/idl -o _xpidlgen/nsINetUtil nsINetUtil.idl
+PreferencePaneBase.mm:161: error: `SetIntPref' undeclared (first use this function)
- make[7]: *** No rule to make target `nsIProxiedChannel.idl', needed by `_xpidlgen/nsIProxiedChannel.h'.   Stop.
+PreferencePaneBase.mm:160: error: `PRInt32' undeclared (first use this function)
- make[6]: *** [export] Error 2
+PreferencePaneBase.mm:160: error: parse error before `=' token
- make[5]: *** [export] Error 2
+PreferencePaneBase.mm:153: error: `PR_TRUE' undeclared (first use this function)
- make[4]: *** [export_tier_9] Error 2
+PreferencePaneBase.mm:153: error: `PR_FALSE' undeclared (first use this function)
- make[3]: *** [tier_9] Error 2
+PreferencePaneBase.mm:153: error: `SetBoolPref' undeclared (first use this function)
- make[2]: *** [default] Error 2
+PreferencePaneBase.mm:133: error: `SetCharPref' undeclared (first use this function)
- make[1]: *** [build] Error 2
+PreferencePaneBase.mm:126: error: `intPref' undeclared (first use this function)
- make: *** [build] Error 2
+PreferencePaneBase.mm:122: error: `PRInt32' undeclared (first use this function)
+PreferencePaneBase.mm:122: error: parse error before `=' token
-==== Cause ====
+PreferencePaneBase.mm:117: error: `boolPref' undeclared (first use this function)
+PreferencePaneBase.mm:112: error: `PRBool' undeclared (first use this function)
-Unknown
+PreferencePaneBase.mm:112: error: parse error before `=' token
+PreferencePaneBase.mm:73: error: `rv' undeclared (first use this function)
-==== Solution ====
+PreferencePaneBase.mm:73: error: `NS_SUCCEEDED' undeclared (first use this function)
+PreferencePaneBase.mm:72: error: `nsresult' undeclared (first use this function)
-Unknown
+PreferencePaneBase.mm:72: error: parse error before `=' token
+PreferencePaneBase.mm:71: error: `nsnull' undeclared (first use this function)
-== rsync: readlink failed: Too many levels of symbolic links (62) ==
+PreferencePaneBase.mm:60: error: `NS_IF_ADDREF' undeclared (first use this function)
+PreferencePaneBase.mm:58: error: `prefService' undeclared (first use this function)
-In Terminal
+PreferencePaneBase.mm:58: error: `NS_ASSERTION' undeclared (first use this function)
+PreferencePaneBase.mm:57: error: `nsCOMPtr' undeclared (first use this function)
-====Error message====
+PreferencePaneBase.mm:57: error: parse error before `>' token
+PreferencePaneBase.mm:49: error: `NS_IF_RELEASE' undeclared (first use this function)  (Each undeclared identifier is reported only once for each function it appears in.)
- Touch /Users/delliott/Documents/Camino/mozilla/camino/build/Development/Camino.app
+PreferencePaneBase.mm:43: nsIPref.h: No such file or directory
-     cd /Users/delliott/Documents/Camino/mozilla/camino
+PreferencePaneBase.mm:42: nsIServiceManager.h: No such file or directory
-     /usr/bin/touch -c /Users/delliott/Documents/Camino/mozilla/camino/build/Development/Camino.app
+PreferencePaneBase.mm:41: nsCOMPtr.h: No such file or directory</pre>
- ** BUILD SUCCEEDED **
- rsync -a --copy-unsafe-links build/Development/Camino.app/ ../dist/Camino.app
- rsync: readlink "/Users/delliott/Documents/Camino/mozilla/camino/build/Development/Camino.app/Contents/Frameworks/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/SharedMenusCocoa.framework/
- SharedMenusCocoa.framework/SharedMenusCocoa.framework" failed: Too many levels of symbolic links (62)
- rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-24/rsync/main.c(717)
- make[5]: *** [libs] Error 23
- make[4]: *** [libs_tier_99] Error 2
- make[3]: *** [tier_99] Error 2
- make[2]: *** [default] Error 2
- make[1]: *** [build] Error 2
- make: *** [build] Error 2
 ====Cause====
-You have a symlink to the SharedMenusCocoa.framework directory in your /Library/Frameworks/SharedMenusCocoa.framework directory. Computers do not like recursion.
+You attempted to build in Xcode before completing a command-line (<tt>make</tt>) build.
 ====Solution====
-Re-install the SharedMenusCocoa framework following [[Development:Building#Shared Menus Framework|these instructions]] and <code>make</code>.
+Re-read [[Development:Building#Pulling_Source_and_Building_Gecko_and_Camino|the instructions on building Gecko and Camino]] and perform the required steps (specifically step 5).
-==/usr/bin/ld: Undefined symbols: .objc_class_name_SharedMenusObj==
+=="/Users/username/Documents/code/CaminoUni/ppc/dist/CaminoDebug.app" failed: No such file or directory (2)==
 In Terminal
 ====Error Message====
-<pre>Ld /Users/ludo/Documents/sources/mozs/obj/Camino/camino/build/Development/Camino.app/Contents/MacOS/Camino
+<pre>** BUILD SUCCEEDED **
-normal i386
+rsync -a --copy-unsafe-links build/Development/Camino.app/ ../dist/Camino.app
-    cd /Users/ludo/Documents/sources/mozs/obj/Camino/camino
+rm -f ../dist/Camino.app/Contents/MacOS/components/camino.xpt
-    /usr/bin/g++-4.0 -o
+../dist/bin/xpt_link ../dist/Camino.app/Contents/MacOS/camino.xpt ../dist/Camino.app/Contents/MacOS/components/*.xpt
-/Users/ludo/Documents/sources/mozs/obj/Camino/camino/build/Development/Camino.app/Contents/MacOS/Camino
+rm -f ../dist/Camino.app/Contents/MacOS/components/*.xpt
--L/Users/ludo/Documents/sources/mozs/obj/Camino/camino/build/Development
+mv ../dist/Camino.app/Contents/MacOS/camino.xpt ../dist/Camino.app/Contents/MacOS/components/camino.xpt
--L../dist/bin -L../dist/lib -L../dist/Embed/components
+tier_testharness:
--F/Users/ludo/Documents/sources/mozs/obj/Camino/camino/build/Development
+/usr/bin/make export_tier_testharness
--filelist /Users/ludo/Documents/sources/mozs/obj/Camino/camino/build/Camino.build/Development/Camino.build/Objects-normal/i386/Camino.LinkFileList
+export_tier_testharness
--lembed_base_s -lunicharutil_s -lmozz -lxpcom -lxpcom_core -lplds4
+/usr/bin/make libs_tier_testharness
--lplc4 -lnspr4 -framework Cocoa -framework PreferencePanes -framework
+libs_tier_testharness
-Carbon -framework CoreFoundation -framework SystemConfiguration
+set -e; \
--framework QuickTime -framework SharedMenusCocoa
+for mkfile in build/macosx/universal/flight.mk; do \
--lprofdirserviceprovider_s -framework AddressBook -lfreebl3 -arch i386
+  make -f /Users/username/Documents/code/mozilla/$mkfile postflight_all TOPSRCDIR=/Users/username/Documents/code/mozilla MOZ_OBJDIR=/Users/username/Documents/code/mozilla/../CaminoUni MOZ_BUILD_PROJECTS="ppc i386"; \
--Wl,-Y,1455 -mmacosx-version-min=10.4 -lpthread -lm -isysroot
+done
-/Developer/SDKs/MacOSX10.4u.sdk
+/usr/bin/make -C /Users/username/Documents/code/mozilla/../CaminoUni/ppc/camino/installer \
-/usr/bin/ld: warning
+          UNIVERSAL_BINARY= SIGN_NSS= stage-package
-/Developer/SDKs/MacOSX10.4u.sdk/Library/Frameworks/SharedMenusCocoa.framework/SharedMenusCocoa
+Creating package directory...
-cputype (18, architecture ppc) does not match cputype (7) for
+building file list ... rsync: link_stat "/Users/username/Documents/code/CaminoUni/ppc/dist/CaminoDebug.app" failed: No such file or directory (2)
-specified -arch flag: i386 (file not loaded)
+done
-/usr/bin/ld: warning suggest use of -bind_at_load, as lazy binding may
-result in errors or different symbols being used
-/usr/bin/ld: Undefined symbols:
-.objc_class_name_SharedMenusObj
-/Users/ludo/Documents/sources/mozs/obj/Camino/camino/build/Camino.build/Development/Camino.build/Objects-normal/i386/MainController.o
-reference to undefined .objc_class_name_SharedMenusObj
-symbol _libVersionPoint used from dynamic library
-../dist/bin/libnspr4.dylib(prvrsion.o) not from earlier dynamic
-library @executable_path/libplds4.dylib(plvrsion.o)
-symbol _libVersionPoint used from dynamic library
-../dist/bin/libnspr4.dylib(prvrsion.o) not from earlier dynamic
-library @executable_path/libplc4.dylib(plvrsion.o)
-collect2: ld returned 1 exit status
-** BUILD FAILED **
-make[4]: *** [libs] Error 1
-make[3]: *** [libs_tier_99] Error 2
-make[2]: *** [tier_99] Error 2
-make[1]: *** [alldep] Error 2
-make: *** [alldep] Error 2</pre>
-====Cause====
+sent 25 bytes  received 20 bytes  90.00 bytes/sec
+total size is 0  speedup is 0.00
-You are building on Intel and your SharedMenusCocoa.framework is PPC-only.
+rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-24/rsync/main.c(717)
+make[2]: *** [stage-package] Error 23
-====Solution====
+make[1]: *** [postflight_all] Error 2
+make: *** [build] Error 2</pre>
-Create a Universal SharedMenusCocoa framework following [[Development:Building#Shared Menus Framework|these instructions]] and <code>make</code>.
-==make[n]: pipe: Too many open files==
-In Terminal on 10.3.x
-====Error Message====
-  Updating dependencies file, .deps/.all.pp
-  Updating dependencies file, .deps/.all.pp
-  Updating dependencies file, .deps/.all.pp
- Updating dependencies file, .deps/.all.pp
- make[5]: /Users/smokey/Camino/dev/trunk/mozilla/config/config.mk:788: pipe: Too many open files
- make[5]: /Users/smokey/Camino/dev/trunk/mozilla/config/config.mk:863: pipe: Too many open files
- Updating dependencies file, .deps/.all.pp
- Makefile:43: ../../../config/autoconf.mk: Too many open files
- Makefile:157: /Users/smokey/Camino/dev/trunk/mozilla/config/rules.mk: Too many open files
- make[5]: *** No rule to make target `libs'.  Stop.
- make[4]: *** [libs] Error 2
- make[3]: *** [libs] Error 2
- make[2]: *** [libs_tier_9] Error 2
- make[1]: *** [tier_9] Error 2
- make: *** [default] Error 2
 ====Cause====
-* A bug in <tt>make</tt> that ships with Xcode 1.x (see {{bug|335506}}); happens most often when making in the objdir
+You attempted to build a Universal debug build (or have tried to <tt>make</tt> in <tt>camino/installer</tt> in a single-architecture debug build).  In either case, the <tt>Camino.app</tt> in <tt>dist</tt> has built correctly and can be used for debugging.
 ====Solution====
-There's no "real" solution to this issue.  Work-arounds include:
+Don’t attempt to package or distribute debug builds, and don’t attempt to build a Universal debug build.  If you are doing development, you only need a single-architecture debug build.  If you want to distribute builds, use a [[Development:Building:mozconfig|distribution <tt>.mozconfig</tt>]] instead.
-* Just <tt>make</tt> again
-** If it continues to fail after a couple of tries, go back to <tt>mozilla</tt> and <tt>make -f client.mk</tt>
-* Manually upgrading your <tt>make</tt> (not recommended)
-==nsString.h:55:15: error: new.h: No such file or directory==
-====Error message====
-  In file included from ../../../dist/include/string/nsDependentString.h:43,
-                 from nsDependentString.cpp:40:
- ../../../dist/include/string/nsString.h:55:15: error: new.h: No such file or directory
-====Cause====
-You are building using GCC4 instead of GCC 3.3. You cannot use GCC4 with Mac OS X 10.2.8 SDK
-====Solution====
-In Terminal.app
- sudo gcc_select 3.3
- make -f client.mk distclean
- make -f client.mk
-(or follow the instructions in the [[Development:Building#FAQ|FAQ]] for configuring the proper SDK)
-==c++: cannot specify -o with -c or -S and multiple compilations==
+==internal compiler error: Bus error==
+In Terminal
 ====Error Message====
- c++: cannot specify -o with -c or -S and multiple compilations
+<pre>In file included from /builds/tinderbox/CmTrunk/Darwin_8.6.0_Depend/build/ppc/camino/src/extensions/CHStackView.m:41:
+/builds/tinderbox/CmTrunk/Darwin_8.6.0_Depend/build/ppc/camino/src/extensions/NSView+Utils.h:45: internal compiler error: Bus error
-(need the full error still)
+Please submit a full bug report,
+with preprocessed source if appropriate.
+See <URL:http://developer.apple.com/bugreporter> for instructions.
+{standard input}:10:FATAL:.abort  detected.  Assembly stopping.
+** BUILD FAILED **
+make[6]: *** [libs] Error 1
+make[5]: *** [libs] Error 2
+make[4]: *** [libs_tier_app] Error 2
+make[3]: *** [tier_app] Error 2
+make[2]: *** [alldep] Error 2
+make[1]: *** [alldep] Error 2</pre>
 ====Cause====
-You switched compilers from gcc 4 to gcc 3 without reconfiguring your tree.
+You upgraded Xcode but did not delete the Xcode header cache.
 ====Solution====
- make -f client.mk distclean
+Delete header cache from <code>/Library/Caches/com.apple.Xcode.501/SharedPrecompiledHeaders</code> as instructed in the [[Development:Building#Upgrading Xcode|build instructions]].
- make -f client.mk
 =Other stuff we've seen; details to be filled in=
 ==Things that need to be tested==
-* [5:25pm] mento: also, someone should install xcode 2.4 without my patch and see what bad things happen when you try to build camino with the 10.2.8 sdk <br>[5:25pm] mento: it's probably the same error from http://developer.mozilla.org/en/docs/Mac_OS_X_Build_Prerequisites#Troubleshooting
-* [5:22pm] mento: whoever updates the wiki with this, you might also want to see what bad stuff happens when you take a tree configured for gcc 4 and try to build with gcc 3
 * [5:43pm] mento: case-sensitive hfs and ufs might not work for camino<br>[5:43pm] mento: we've had at least one patch to correct that, i'm not sure if there are more<br>[5:44pm] mento: problem was we were #including header files with the wrong case<br>[5:44pm] ardissone|away: yeah<br>[5:44pm] mento: nothing in the core, only in camino<br>[5:44pm] mento: someone liked calling it Quickdraw.h<br>[5:44pm] ardissone|away: i think we've fixed all the ones mentioned<br>[5:44pm] ardissone|away: we just need someone to try again <br>[5:44pm] mento: gofer it<br>[5:45pm] mento: actually, just set up a test disk image<br>[5:45pm] mento: copy the sdk to it<br>[5:45pm] mento: and the source tree<br>[5:45pm] mento: and build<br>[5:45pm] mento: no need for a whole system reinstall
-==Missing/non-Uni SMF==
 ==Other==
-There are some described on the Camino Build instructions page, on Building Mozilla, and on the Mac Build Instructions pages (links below)
+There are some described on the Camino Build instructions page, on Building Mozilla, and on the Mac Build Instructions pages (links below); most are probably not relevant at all.
 * [http://developer.mozilla.org/en/docs/Mac_OS_X_Build_Prerequisites#Troubleshooting Mac OS X Build Prerequisites: Troubleshooting]
 * [http://developer.mozilla.org/en/docs/Mozilla_Build_FAQ#Mac-specific_questions Mozilla Build FAQ: Mac-specific questions] (less interesting, and more tuned to Fx)
 *: [5:40pm] mento: the mac-specific questions on there - most of the errors there are no longer relevant, realy
-* [[Development:Building#FAQ]] has some non-build errors, and needs to link prominently to this page.